Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

Wear and Failure Analysis of Semi-Autogenous Grinding Mill Liners

Journal of Failure Analysis and Prevention - The wear and failure analysis of shell liners of a grinding mill is investigated. Metallurgical and tribological studies were conducted on the worn...     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.     

Observer‐based adaptive optimal output containment control problem of linear heterogeneous Multiagent systems with relative output measurements

This paper develops a relative output‐feedback–based solution to the containment control of linear heterogeneous multiagent systems. A distributed optimal control protocol is presented for the followers to not only assure that their outputs fall into the convex hull of the leaders' output but also optimizes their transient performance. The proposed optimal solution is composed of a feedback part, depending of the followers' state, and a feed‐forward part, depending on the convex hull of the leaders' state. To comply with most real‐world applications, the feedback and feed‐forward states are assumed to be unavailable and are estimated using two distributed observers. That is, a distributed observer is designed to measure each agent's states using only its relative output measurements and the information that it receives by its neighbors. Another adaptive distributed observer is designed, which uses exchange of information between followers over a communication network to estimate the convex hull of the leaders' state. The proposed observer relaxes the restrictive requirement of having access to the complete knowledge of the leaders' dynamics by all the followers. An off‐policy reinforcement learning algorithm on an actor‐critic structure is next developed to solve the optimal containment control problem online, using relative output measurements and without requiring the leaders' dynamics. Finally, the theoretical results are verified by numerical simulations.     

Formation and wear mechanism of nickel titanium intermetallics during heat treatment of nickel coating on Ti-6Al-4V substrate

In the present work, inter-diffusion of nickel and titanium and formation of Ni-Ti intermetallic compounds on Ti-6Al-4V substrate have been studied. Initially, nickel was electrodeposited on the alloy using a modified Watts bath solution at a current density of 2 A dm^?2 for 1?h. The coated specimens were then heat treated for different durations at 750, 800 and 850 °C under argon atmosphere. The effects of temperature and time on the characteristics, hardness and wear resistance of intermetallic phases were investigated. The results showed that a multilayer structure was formed after heat treatment, an outer layer of residual nickel, an area of intermetallic layers with different compositions followed by a solid solution of Ni-Ti. It was also observed that an increase in time or temperature at first led to the formation of thicker intermetallic layers; however, after passing a critical point, the intermetallic layers seem to dissolve into the substrate. Furthermore, the wear rates of the diffusion treated samples were four times lower compared to Ti-6Al-4V alloy when sliding against AISI 52100 hardened steel.     

Geothermal and solar energy–based multigeneration system for a district

In this study, parabolic trough collector with an integrated source of geothermal water is used with regenerative Rankine cycle with an open feedwater heater, an electrolyzer, and an absorption cooling system. The absorption fluids used in the solar collectors were Al₂O₃‐ and Fe₂O₃‐based nanofluids. Detailed energetic and exergetic analyses are done for the whole system including all the components. A comparative analysis of both the used working fluids is done and plotted against their different results. The parameters that are varied to change the output of the system are ambient temperature, solar irradiance, the percentage of nanofluids, the mass flow rate of the geothermal well, the temperature gradient of the geothermal well that had an effect on the net power produced, and the outlet temperature of the solar collector overall energetic and exergetic efficiencies. Other useful outputs by this domestic integrated multigeneration system are the heating of domestic water, space heating (maintaining the temperature at 40°C‐50°C), and desalination of seawater (flash distillation). The hydrogen production rate for both the fluids diverges with each other, both producing average from 0.00490 to 0.0567 g/s.     

Platinum‐promoted fibrous silica Y zeolite with enhanced mass transfer as a highly selective catalyst for n‐dodecane hydroisomerization

A fibrous silica zeolite Y (HY@KCC‐1) catalyst with a high surface area of 568 m²/g and unique core‐shell morphology was successfully synthesized via a modified KCC‐1 synthesis method. Characterization of the catalysts was achieved with X‐ray powder diffraction (XRD), field emission scanning microscope (FESEM), N₂ adsorption/desorption, and 2,6‐dimethylpyridine adsorbed Fourier‐transform infrared spectroscopy (FTIR). The Pt/HY@KCC‐1 has displayed complete n‐dodecane conversion coupled with an incredibly enhanced isomer yield of 72% at 350°C, nearly two‐fold higher than that of unmodified Pt/HY catalyst. Remarkably, Pt/HY@KCC‐1 had an internal effectiveness factor (η) of unity and negligible internal diffusion limitation, thus suggesting its potential application in hydroisomerization of higher hydrocarbons for enhancing fuel properties.     

An iterative code to investigate heat pump performance improvement by exhaust gases heat recovery

The race between the development of technologies and energy demand has drawn the guidelines of energy strategies for the next two decades. Indeed, the governmental organizations as well as the private sectors are spending huge effort to come up with new adequate strategies that allow to decrease energy consumption. Having said that, heat pump becomes an essential system in our daily life not only in residential building but also in hospital, industrial and touristic building. Nonetheless, (HP)s have very high energy consumption rate. Thus, and to be in line with the new trends in energy strategies, it is convenient to find new methods to enhance the performance of heat pump in order to reduce energy consumption. In this frame, the present paper suggests an approach to enhance the performance the heat pumps using the heat recovery from generators. For this purpose, an in-house code is developed allowing to simulate two new proposed systems (condenser upstream exhaust gases heat recovery system (CU-EGHRS) and condenser downstream exhaust gases heat recovery system (CD-EGHRS). It has been shown that the increase in the performance of the heat pump depends on the capacity of the generator. Also, the CD-EGHRS is shown to be the best. For instance, in the case of a 15 kVA generator, the enhancement could reach 42% for the CD-EGHRS. This enhancement increases to 5640% in the case of a 180 kVA generator.